Barrier® 35 WG

PREPARING THE PLANT PROTECTION PRODUCT FOR APPLICATION:
The plant protection product calculated over the recommended dose is first mixed with some water in a separate container. The tank of the sprayer is filled halfway with water. While the mixer of the machine is in operation, the prepared mixture is added to the tank. Continuing to mix, the tank is completed with water. The mixing process is continued until the application is completed. Use the prepared mixture on the same day.

CALIBRATION:
Before the application, the sprayer must be calibrated. The amount of mixture to be given to a certain area should be well adjusted to provide a good coating in applications. Applications should be made at cool times of the day, in windless or slightly windy weather conditions.

CLEANING OF THE SPRAYING MACHINE:
Empty the sprayer’s tank safely immediately after the application is complete. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and waste into water sources.

USAGE OF THE PLANT PROTECTION PRODUCT:
The first application against mildew in the vineyard should be started when the shoots reach 25-30 cm. The second and subsequent applications should be done with 10-15 days intervals, taking into account the effect time of the plant protection product used in the first application, the development status of the disease and meteorological factors.

INFORMATION ON RESISTANCE:
The plant protection product named Hektaş Barrier® 35 WG is a fungicide classified as Group A1,4 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action encourage the development of resistance. Therefore, in order to delay the development of resistance, do not exceed the total number of applications recommended for Hektaş Barrier® 35 WG in the same production season. In cases where the application needs to be repeated, pay attention to the use of plant protection products with different mechanisms of action (except for Group A1.4).

COMPATIBILITY: It is recommended to make premix trials before mixing large quantities for application.

* It is not used in vineyard areas where vine leaves for consumption will be harvested.